Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SSH on CBS3120

Hello all,

We have some cbs3120, running cbs31x0-universal-mz.122-50.SE3. I was looking for an IOS that supports ssh. Can't find anything, at least when I look at the supported features on the cisco site. The following url http://www.cisco.com/c/en/us/td/docs/switches/blades/3120/software/release/12-2_46_se/release/configuration/guide/3120scg/swintro.html#wp1043103 says that ssh is supported on the cryptographic universal image, but ssh does not show on the supported features...

Does anyone know if such an image exists or doesn't this type of switch support SSH?

 

Thank you in advance,

Katerina

2 REPLIES

Hi Katerina,You'll need an

Hi Katerina,

You'll need an IOS image with K9 (cryptographic) support. For the Catalyst 3120 with the same IOS version as you currently have this will be cbs31x0-universalk9-mz.122-50.SE3.bin.

If you have support for the switch you should be able to get the image directly from the Cisco Software Download page and then navigate via Products -> Switches -> Blade Switches -> Cisco Blade Switches for HP -> Cisco Catalyst Blade Switch 3120 for HP.

Regards

 

New Member

Thank you for your reply!I

Thank you for your reply!

I will download cbs31x0-universalk9-mz.122-50.SE5.bin, because there are some related bugs with SE3. What puzzled me is that ssh does not show up in the supported features of this IOS.

 

I will download it and see what happens!

 

196
Views
0
Helpful
2
Replies