Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ssh v2 and CAT OS version on Cisco 6500 series switches?

hello all,

I have been trying to find out which CAT OS version on Cisco Swithc 6509 (or 6500 series) switches, will support ssh v2?

can some on eplease point me to right direction please?

Regards,

Masood

9 REPLIES
Purple

Re: ssh v2 and CAT OS version on Cisco 6500 series switches?

Looks like it might be available in code version 8.3 or later .

New Member

Re: ssh v2 and CAT OS version on Cisco 6500 series switches?

Yes they have. I am sure that it is supported for one of th eversions of 8.x but it is the .x part of it that I am not sure and I hav enot benable to find out so far!?

Thanks,

Masood

New Member

Re: ssh v2 and CAT OS version on Cisco 6500 series switches?

thanks. where did you find this information if I may ask please?

Thanks,

Masood

New Member

Re: ssh v2 and CAT OS version on Cisco 6500 series switches?

Hi Masood,

You will find this information under the release notes of 8.6 version.

Please find the link below:- http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/system/release/notes/OL_4498.html

Using Secure Shell Encryption for Telnet sessions (support for SSH version 2)

Rate if this help.

Thanks

Inayath.

New Member

Re: ssh v2 and CAT OS version on Cisco 6500 series switches?

Switch> (enable) sh ssh

Id Protocol Cipher HMAC State PID

--- -------- ---------- ---------- --------------------- -----

1 * V2 AES256-CBC HMAC_SHA1 SSH_SESSION_OPEN PID number

Id Userid Host

--- -------------------------------- ------------------------------------

1 * Username x.x.x.x

SSH server mode : V1 and V2

you see both modes : v1 and v2 is currently running!

regards,

Masood

New Member

Re: ssh v2 and CAT OS version on Cisco 6500 series switches?

Hi,

based on the pdf file, only 8.6(x) supports ssh v2 but here I have a switch software version 8.5(9) and it supports v1 and v2!?

then what was teh article saying?

it maybe that 8.6 and later don't support v1 at all as oppose to this 8.5(9) version that supports both v1 and v2!?

isn't it?

WS-C6513 Software, Version NmpSW: 8.5(9)

Thanks,

Masood

Purple

Re: ssh v2 and CAT OS version on Cisco 6500 series switches?

Catos release notes for 8.X code . Then just use the find function on your browser and search for SSH .

Bronze

Re: ssh v2 and CAT OS version on Cisco 6500 series switches?

Use the feature navigator to choose:

Secure Shell Version 2 Server

The code available is:

8.3(1) to 8.7(2a) for CatOS

Requires: K9 or CVK9 Feature Set

Requires: 6500 Sup, Sup2, Sup32, Sup720

New Member

Re: ssh v2 and CAT OS version on Cisco 6500 series switches?

Secure Shell Version 2 Server ?

this means on any switch that i want to use ssh v2, I use this command? as long as I can see the mix mode for v1 and vb2 as I posted above.

Please advise.

Thanks,

Masood'

998
Views
0
Helpful
9
Replies