Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

SSH version 2 not working on 4500X switch

We have 4500X devices running latest IOS "cat4500e-universalk9.SPA.03.04.02.SG.151-2.SG2.bin". I have created domain names,crypto keys and whatever commands required to enable ssh version 2 but still it shows 1.5 version. This is happening only on 4500X devices.

Suggestions and solutions will be helpful.

 

 

2 REPLIES
Hall of Fame Super Gold

config tip ssh version 2end 

config t

ip ssh version 2

end

 

Hall of Fame Super Gold

The title of the original

The title of the original post indicates that SSH ver 2 is not working. But the text of the post does not really say that version 2 is not working. It only says that the output of show ip ssh shows version 1.5. When the switch indicates version 1.5 it will support both version 1 and version 2 of SSH. If you want to see version 2 in the output of the show command then use the suggestion from Leo. If you specify ssh version 2 then the switch will support version 2, only version 2, and version 2 will appear in the output.

 

HTH

 

Rick

580
Views
0
Helpful
2
Replies
CreatePlease to create content