Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Stack Between Cisco2960X-48 and Cisco2960-24, is it possible ?

Hello, I have a WS-C2960-24PC-L, and I would like to know if it is possible to stack with a WS-C2960X-48FPS-L


Thank you

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Stack Between Cisco2960X-48 and Cisco2960-24, is it possible ?

No - the WS-C2960-24PC-L is not a stackable model. Look at the rear panel (Figure 25 on the hardware installation guide) - there's no stack port (or even place to install a module).

You can mix 2960X with 2960S stacking switches, assuming you have the optional FlexStack Stacking modules. There are some limitation in that case - see the Q&A here.

2 REPLIES
Hall of Fame Super Silver

Stack Between Cisco2960X-48 and Cisco2960-24, is it possible ?

No - the WS-C2960-24PC-L is not a stackable model. Look at the rear panel (Figure 25 on the hardware installation guide) - there's no stack port (or even place to install a module).

You can mix 2960X with 2960S stacking switches, assuming you have the optional FlexStack Stacking modules. There are some limitation in that case - see the Q&A here.

New Member

Stack Between Cisco2960X-48 and Cisco2960-24, is it possible ?

Marvin.

Thank you very much

118
Views
0
Helpful
2
Replies