I have a pair of 3750E-24PD-S stacked together, it seems after stacked together the stacked switch always flood the console screen with these messages which are not true:
*Mar 1 00:16:15.427: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed
*Mar 1 00:16:36.197: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed (Switch-2)
*Mar 1 00:16:42.472: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed
*Mar 1 00:17:09.517: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed
*Mar 1 00:18:45.348: %PLATFORM_ENV-1-RPS_PS_SIGNAL_FAULTY: 12V signal on RPS power supply A is faulty (Switch-2)
*Mar 1 00:22:55.001: %PLATFORM_ENV-1-RPS_FAN_FAILED: RPS fan failed
Switch-2 is the stack member, Switch-1 is the stack master. The RPS fan failed refers to RPS2300 or the internal power supply of 3750E? Even when I turned on the RPS2300 the stacked switch still display the messages. Also I have two RPS2300 serving stack master and stack member respectively both RPS2300 were switched off why the messages only refer to Switch-2 and not Switch-1? hmm...Hope some of you can help to clarify thanks
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.