Can we stack WS-C3750G-24PS-S with WS-C3750G-48PS-S with the same IOS version?
Also how many switches we can stack in one master switch?
Cisco StackWise technology unites up to nine individual switches into a single logical unit, using special stack-interconnect cables and stacking software. The individual switches can be any combination of Cisco Catalyst 3750 and Cisco Catalyst 3750-E Series Switches. The stack behaves as a single switching unit that is managed by a master switch, elected from one of the member switches. The master switch automatically creates and updates all the switching and optional routing tables. A working stack can accept new members or delete old ones without service interruption.
You can. Make sure both switches have the same IOS and the same Feature Set (example IP Base). Before you stack the two together, power down the switch member, connect the stacking cables then power up the switch member. Failure to do so will cause BOTH switch to reboot.
Maximum switches in a stack is 9 (including the master) but I personally wouldn't recommend more than 7 (including the master).
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...