Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Stack ports

Dear, Can I use the Stack ports between 2 3750 switches as a connection between them, where I want to configure a RSTP redundancy using those ports. Thank you for your help.
  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

You can configure both ports

You can configure both ports into an etherchannel, if this what you're trying to do.

2 REPLIES
Hall of Fame Super Gold

You can configure both ports

You can configure both ports into an etherchannel, if this what you're trying to do.

Super Bronze

DisclaimerThe Author of this

  • Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

You cannot, nor is there need to.  The 3750 stackports (automatically) run a proprietary protocol that manages the traffic on the stack ring.

20
Views
0
Helpful
2
Replies
This widget could not be displayed.