12-19-2013 09:27 PM - edited 03-07-2019 05:11 PM
I have configured two cisco ws-c3750X switches in stack, stack is working fine but problem with the switch two is we are not reachable to network.
i can ping the gateway from the switch one,which is master but not able to ping from switch 2.
also i connect two laptop to individual switch and given the same subnet ip ,but also we are not able to ping each other.
Switch detail:
CORE_SWI#show switch
Switch/Stack Mac Address : 6c41.6aa5.de00
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master 6c41.6aa5.de00 2 1 Ready
2 Member 442b.0310.1500 1 1 Ready
CORE_SWI#show swi
CORE_SWI#show switch de
CORE_SWI#show switch detail
Switch/Stack Mac Address : 6c41.6aa5.de00
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master 6c41.6aa5.de00 2 1 Ready
2 Member 442b.0310.1500 1 1 Ready
Stack Port Status Neighbors
Switch# Port 1 Port 2 Port 1 Port 2
--------------------------------------------------------
1 Ok Ok 2 2
2 Ok Ok 1 1
CORE_SWI#
CORE_SWI#show ver
CORE_SWI#show version
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE5,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 09-Feb-12 18:14 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02800000
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTW
ARE (fc1)
CORE_SWI uptime is 21 weeks, 5 days, 14 hours, 1 minute
System returned to ROM by power-on
System image file is "flash:/c3750e-universalk9-mz.122-55.SE5/c3750e-universalk9
-mz.122-55.SE5.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750X-48 (PowerPC405) processor (revision A0) with 262144K bytes of me
mory.
Processor board ID FDO1717R1KM
Last reset from power-on
2 Virtual Ethernet interfaces
1 FastEthernet interface
104 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 6C:41:6A:A5:DE:00
Motherboard assembly number : 73-12552-08
Motherboard serial number : FDO171717T3
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750X-48T-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO17170W97
System serial number : FDO1717R1KM
Top Assembly Part Number : 800-31326-07
Top Assembly Revision Number : B0
Version ID : V04
CLEI Code Number : COMJT00ARD
Hardware Board Revision Number : 0x04
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 54 WS-C3750X-48 12.2(55)SE5 C3750E-UNIVERSALK9-M
2 54 WS-C3750X-48 12.2(55)SE3 C3750E-UNIVERSALK9-M
Switch 02
---------
Switch Uptime : 1 day, 19 hours, 34 minutes
Base ethernet MAC Address : 44:2B:03:10:15:00
Motherboard assembly number : 73-12552-05
Motherboard serial number : FDO16030NM2
Model revision number : A0
Motherboard revision number : C0
Model number : WS-C3750X-48T-S
Daughterboard assembly number : 800-32727-01
Daughterboard serial number : FDO16030TKJ
System serial number : FDO1603K2QE
Top assembly part number : 800-31326-02
Top assembly revision number : E0
Version ID : V02
CLEI Code Number : COMJT00ARB
License Level : ipservices
License Type : Permanent
Next reboot licensing Level : ipservices
Configuration register is 0xF
CORE_SWI#
CORE_SWI#show lice
CORE_SWI#show license all
CORE_SWI#show license all swi
CORE_SWI#show license all switch 1
License Store: Primary License Storage
StoreIndex: 0 Feature: ipbase Version: 1.0
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
License Store: Evaluation License Storage
StoreIndex: 0 Feature: ipservices Version: 1.0
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License Priority: None
License Count: Non-Counted
CORE_SWI#show license all switch 2
License Store: Primary License Storage
StoreIndex: 0 Feature: ipbase Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Priority: Medium
License Count: Non-Counted
StoreIndex: 1 Feature: ipservices Version: 1.0
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
License Store: Evaluation License Storage
StoreIndex: 0 Feature: ipservices Version: 1.0
License Type: Evaluation
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License Priority: None
License Count: Non-Counted
CORE_SWI#
Regards,
Wajid Dabir
12-19-2013 09:39 PM
what is a command to make license in use and to make other license not in use.
12-19-2013 10:04 PM
Wajid,
switch(config)#license boot level
switch(config)#end
switch(config)#do wr
switch(config)#do reload
Add on the beginning to not use a specific license.
If you want to change a license from switch 2:
switch#session 2
switch-2(config)#
Haihua
12-19-2013 09:41 PM
Hello Wajid,
Please send me the outputs from the next commands:
Sh run int x/x -----------> for the affected device on switch 2
Sh ip int brief | exc una
Sh vlan
Sh ip route
Who is the GW?
Verify the configuration for the device that it is connected on switch 2. Should be a problem with vlan assignment.
Haihua
12-19-2013 09:51 PM
My gateway is my firewall and i have only 1 vlan in network.
CORE_SWI#show ip int bri | exc una
Interface IP-Address OK? Method Status Protocol
Vlan1 192.168.1.201 YES manual up up
CORE_SWI#show vla
CORE_SWI#show vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi1/0/1, Gi1/0/2, Gi1/0/3
Gi1/0/4, Gi1/0/5, Gi1/0/6
Gi1/0/7, Gi1/0/8, Gi1/0/9
Gi1/0/10, Gi1/0/11, Gi1/0/12
Gi1/0/13, Gi1/0/14, Gi1/0/15
Gi1/0/16, Gi1/0/17, Gi1/0/18
Gi1/0/19, Gi1/0/20, Gi1/0/21
Gi1/0/22, Gi1/0/23, Gi1/0/24
Gi1/0/25, Gi1/0/26, Gi1/0/27
Gi1/0/28, Gi1/0/29, Gi1/0/31
Gi1/0/32, Gi1/0/33, Gi1/0/34
Gi1/0/35, Gi1/0/36, Gi1/0/37
Gi1/0/38, Gi1/0/39, Gi1/0/40
Gi1/0/47, Gi1/0/48, Gi2/0/1
Gi2/0/2, Gi2/0/3, Gi2/0/4
Gi2/0/5, Gi2/0/6, Gi2/0/7
Gi2/0/8, Gi2/0/9, Gi2/0/10
Gi2/0/11, Gi2/0/12, Gi2/0/13
Gi2/0/14, Gi2/0/15, Gi2/0/16
Gi2/0/17, Gi2/0/18, Gi2/0/19
Gi2/0/20, Gi2/0/21, Gi2/0/22
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
Gi2/0/23, Gi2/0/24, Gi2/0/25
Gi2/0/26, Gi2/0/27, Gi2/0/28
Gi2/0/29, Gi2/0/31, Gi2/0/32
Gi2/0/33, Gi2/0/34, Gi2/0/35
Gi2/0/36, Gi2/0/37, Gi2/0/38
Gi2/0/39, Gi2/0/40, Gi2/0/47
Gi2/0/48
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
CORE_SWI#sho ip route
Default gateway is 192.168.1.5
Host Gateway Last Use Total Uses Interface
ICMP redirect cache is empty
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide