12-11-2006 01:08 AM - edited 03-05-2019 01:16 PM
hi all,
i am facing an issue. I've got two cisco 4503 to be configured as VTP Server mode. All vlans are created on this switches. I've got a stack of 3 cisco 3750 IOS 12.2(25) SEE2. and this stack has two gig link one connected to each 4503 switch. when i say show vlan on this stack i can see all the vlans. But problem is that switch 3 is become a master and if i congifure one port on switch 1 lets say fast 1/0/1 to be member of vlan xyz, the port will never work for this vlan or any vlan from vtp domain. If a confgure port 1 from switch 3 i.e. fast 3/0/1 and make it member of xyz vlan, all seems to work fine.
strange.
help pls.
adil
12-11-2006 05:21 AM
Hi Adil,
Could you please paste the config from the stack. It would help us to find the issue.
Regards,
Wilson Samuel
12-11-2006 06:47 AM
Hi Adil,
can you make sure that switch-1 is working when it is individual with the vlan configured? u can simply erase the configuration & make it as an standalone switch rather than a stack switch.
12-12-2006 07:32 PM
Can anyone explain ,whats the need of Stacking??at which seies of switches present??
How stacking works??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide