Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

stacking 3750 switches

Hey guys,

Can someone point me to a "how to" on stacking switches. What the CLI is for getting them to see each other and so on?

Thanks,

Brent

1 ACCEPTED SOLUTION

Accepted Solutions
Purple
3 REPLIES
Purple
New Member

Re: stacking 3750 switches

thanks a ton!

VIP Super Bronze

Re: stacking 3750 switches

Brent,

Here is doc on how to stack them:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/hardware/installation/guide/HGcliSET.html

After stacking them login and make one of the switches master by giving it a higher priority. Priority is between 1 and 15. So I would give the master 14 or 15. I usually give priority to members too like:

Switch-A 14 (Master)

Switch-B 12 (member)

Switch-C 10 (Member)

Switch-D 8 (Member)

Also make sure you have the same image on all of them.

HTH

Reza

139
Views
0
Helpful
3
Replies