I am going to be stacking a new 24 port C3750GTS switch with another of the same model. I have done this before and I have set the priority of the current live switch to 5 and I will provision the 2 switch before or after I use the stack cable. I have a couple of questions:
1.) Both the new and older switch are running IOS 12.2(35)SE5 - C3750-IPBASE-M, is it worth upgrading or leave them as they are?
2.) Do both switches have t use the same IOS version? or Image?
3.) I have read you can stack different models togther, which I didn't think possible and I can't find a link for what can be stacked with what, does anyone have a link?
we can connect 3750 3750G 3750E series also into the same stack
What ever the image is running in the master switch the same image will push into the member switches automatically when u add the switches into the stacks , if it is not happend we need to upgrade the image manually
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...