Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

stacking c2960 switches

Hi all, is is possible to stack the c2960 switch? do they stack at theback, or do you need to use the gigastack connectors on the fornt which use up your gbic slots.

please advise

6 REPLIES

Re: stacking c2960 switches

You can't stack 2960 switches. Try looking into 2975 switches, they have stacking capability.

Thanks,

Mohamad

New Member

Re: stacking c2960 switches

1.Please what do you mean by stacking?

2.Please I encountered a problem connecting 2960G-TCL gigabit ethernet port to 2960-TCL gigabit port, in fact the LEDs on both ports didn't come on.Please what is wrong?

New Member

Re: stacking c2960 switches

Possible answer to #2, is to use a Crossover cable. You should see link after that.

New Member

Re: stacking c2960 switches

Hello. Where I can read about what switch series support stack?

Re: stacking c2960 switches

Purple

Re: stacking c2960 switches

The only smaller chassis that support true stacking are the 3750 series and the 2975 (L2) series . These use the stacking cables in the back of the chassis to connect everything together.

690
Views
0
Helpful
6
Replies