I'm experimenting with stacking two catalyst 3750's ver 12.2(25)SEE1 and 12.2(25)SEB4. The 12.2(25)SEE1 became the stack master and overwrote code on my ver SEB4 switch. Is there a way to get my original IOS version and codes back onto my 12.2(25)SEB4 switch w/o having to blow it away.
If you have one particular switch you want as master , you have to give it a priority of 15 . If there was enough room in flash the old version should still be there , just do a "dir flash1: or dir flash2: and see if you can locate it . If its still there you can probably discconect the stack cables console in and delete the 12.2.25 SEE1 image and reboot the switch . SEE1 is newer so it picked that code and loaded it , not sure why you need the older code .
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.