Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Stacking issue

I am trying to configure stacking between two switches but getting an version mismatch error.

Below are the show version of both switch.

1.

C3750-MB-10IDF-01#show version

Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(55)SE7, RELE                                                                             ASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2013 by Cisco Systems, Inc.

Compiled Mon 28-Jan-13 10:16 by prod_rel_team

Image text-base: 0x01000000, data-base: 0x02D00000

ROM: Bootstrap program is C3750 boot loader

BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE                                                                              (fc1)

C3750-MB-10IDF-01 uptime is 7 minutes

System returned to ROM by power-on

System image file is "flash:c3750-ipbasek9-mz.122-55.SE7/c3750-ipbasek9-mz.122-5                                                                             5.SE7.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C3750G-24PS (PowerPC405) processor (revision F0) with 131072K bytes of memory.

Processor board ID FOC1235W6FS

Last reset from power-on

1 Virtual Ethernet interface

28 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : 00:23:05:92:79:80

Motherboard assembly number     : 73-10217-07

Power supply part number        : 341-0108-03

Motherboard serial number       : FOC1235245L

Power supply serial number      : DCA1234A3FT

Model revision number           : F0

Motherboard revision number     : B0

Model number                    : WS-C3750G-24PS-S

System serial number            : FOC1235W6FS

Top Assembly Part Number        : 800-26855-01

Top Assembly Revision Number    : D0

Version ID                      : V05

CLEI Code Number                : CNMWR00ARC

Hardware Board Revision Number  : 0x09

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    1 28    WS-C3750G-24PS     12.2(55)SE7           C3750-IPBASEK9-M

Configuration register is 0xF

2.

Switch#show version

Cisco IOS Software, C3750E Software (C3750E-IPBASEK9-M), Version 12.2(55)SE7, RE

LEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2013 by Cisco Systems, Inc.

Compiled Mon 28-Jan-13 09:55 by prod_rel_team

Image text-base: 0x00003000, data-base: 0x02800000

ROM: Bootstrap program is C3750E boot loader

BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(58r)SE1, RELEASE SOFTW

ARE (fc1)

Switch uptime is 6 minutes

System returned to ROM by power-on

System image file is "flash:c3750e-ipbasek9-mz.122-55.SE7/c3750e-ipbasek9-mz.122

-55.SE7.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

License Level: lanbase

License Type: Permanent

Next reload license Level: lanbase

cisco WS-C3750X-48P (PowerPC405) processor (revision A0) with 262144K bytes of m

emory.

Processor board ID FDO1734R18H

Last reset from power-on

1 Virtual Ethernet interface

1 FastEthernet interface

52 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : C0:67:AF:D2:68:80

Motherboard assembly number     : 73-12553-10

Motherboard serial number       : FDO17340X9Z

Model revision number           : A0

Motherboard revision number     : B0

Model number                    : WS-C3750X-48P-L

Daughterboard assembly number   : 800-32727-03

Daughterboard serial number     : FDO17340HC0

System serial number            : FDO1734R18H

Top Assembly Part Number        : 800-31324-08

Top Assembly Revision Number    : C0

Version ID                      : V05

CLEI Code Number                : COMJZ00ARE

Hardware Board Revision Number  : 0x05

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    1 54    WS-C3750X-48P      12.2(55)SE7           C3750E-IPBASEK9-M

Regards,

wajid dabir

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Stacking issue

I know why.

Switch 1 is a plain 3750 but running IP Base feature set.

Switch 2, however, is a 3750X but has LAN Base feature set.

So you will need to upgrade the license of the 3750X to IP Base.

Sent from Cisco Technical Support Nintendo App

4 REPLIES
VIP Purple

Re: Stacking issue

HI Wajid,

Run this command and check the incompatibilty in configuration of both swicthes:

show platform stack compatibility

please also check this link to resolve:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/troubleshooting/switch_stacks.html

Regards

Dont forget to arte helpful posts.

New Member

Stacking issue

Dear Sandip,

below are the platform detail

------------------ show platform frontend-controller ver 0 ------------------

Software Version   0.43

Serial Number      

Part Number        

System Type        2

Device Id          1

Device Revision    0

------------------ show platform frontend-controller ver 0 ------------------

Software Version   0.67

Hardware Version   38

Bootloader Version 14

System Type        5

Device Id          1

Device Revision    0

Hall of Fame Super Gold

Re: Stacking issue

I know why.

Switch 1 is a plain 3750 but running IP Base feature set.

Switch 2, however, is a 3750X but has LAN Base feature set.

So you will need to upgrade the license of the 3750X to IP Base.

Sent from Cisco Technical Support Nintendo App

New Member

Re: Stacking issue

Thanks leo....for your support.

233
Views
0
Helpful
4
Replies
CreatePlease login to create content