Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

stacking WS-C3750X-24P with WS-C3750G-24PS

HI

I'm having trouble stacking a new WS-C3750X-24P with existing switches WS-C3750G-24PS    

I can see the license is on the  new WS-C3750X-24P:

switch#sho lic

Index 1 Feature: ipservices

        Period left: 8  weeks 4  days

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

        License Priority: None

        License Count: Non-Counted

Index 2 Feature: ipbase

        Period left: 0  minute  0  second

Index 3 Feature: lanbase

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Priority: Medium

        License Count: Non-Counted

Switch#sho ver | i uni

System image file is "flash:/c3750e-universalk9-mz.122-55.SE1/c3750e-universalk9-mz.122-55.SE1.bin"

I’m not sure if we need to change the new switch to an IPBASE image to be compatible, with the existing switches …..

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    1 28    WS-C3750G-24PS     12.2(55)SE1           C3750-IPBASEK9-M

I could put on the c3750e-ipbasek9-mz.122-55.SE1 image, but I may need to get the license sorted still, but not sure if that will work or how to add it if i got one.....

Any help would we great

thanks

phil

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

stacking WS-C3750X-24P with WS-C3750G-24PS

Phil,

You can stack any combinations of 3750 series together as long as you have the same exact IOS and license.

To add a swith to an existing stack follow this link:

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00807811ad.shtml#Add

HTH

2 REPLIES
VIP Super Bronze

stacking WS-C3750X-24P with WS-C3750G-24PS

Phil,

You can stack any combinations of 3750 series together as long as you have the same exact IOS and license.

To add a swith to an existing stack follow this link:

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00807811ad.shtml#Add

HTH

New Member

stacking WS-C3750X-24P with WS-C3750G-24PS

Thanks, i understand that if they have the same IOS and lic that , i'm just need doing to know specifially how, you get them to stack. As i can't put the 'universail' image on the 3750G and am unsure about how the license works/installed.

Should i install c3750e-ipbasek9-mz.122-55.SE1 image on the E , so they are on the same 22.55.SE1 and then how do i do the license?

Or is there an image i can up on the 3750G that will work?

thanks

phil

669
Views
0
Helpful
2
Replies
CreatePlease to create content