Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

standard and public buffer pool

hi everbody!

i just want to know when we use " show controllers int e0" command, we get

Rx ring with 16 entries.

My question is does 16 means total number of buffers from both standard public buffer poool and private system buffer pool?

thanks a lot!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: standard and public buffer pool

Hello Sarah,

I may be wrong but I don't think they are the same.

RX ring is more interface related.

see for the system buffers

http://www.cisco.com/en/US/products/hw/modules/ps2643/products_tech_note09186a0080093fc5.shtml#pools

see this example of sh controller ethernet

http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_s2.html#wp1016433

here the 32 entries are all 1524 bytes each

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

Re: standard and public buffer pool

Hello Sarah,

I may be wrong but I don't think they are the same.

RX ring is more interface related.

see for the system buffers

http://www.cisco.com/en/US/products/hw/modules/ps2643/products_tech_note09186a0080093fc5.shtml#pools

see this example of sh controller ethernet

http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_s2.html#wp1016433

here the 32 entries are all 1524 bytes each

Hope to help

Giuseppe

Bronze

Re: standard and public buffer pool

thanks a lot Giuseppe!

162
Views
0
Helpful
2
Replies
CreatePlease to create content