what i would suggest is, jus issue a command "show standby" for the router you hav got access. with that you can come to which router is Active & which is Standy. it should be mentioned something like this....
Vlan5 - Group 5
Local state is Standby, priority 110, may preempt
Hellotime 5 sec, holdtime 15 sec
Next hello sent in 0.008
Virtual IP address is 10.2.9.252 configured
Active router is 10.2.9.251, priority 111 expires in 11.176
Standby router is local
34 state changes, last state change 1w3d
IP redundancy name is "hsrp-Vl5-5" (default)
this configuration which i have mentioned is for the switch, similar kind of thing will be for router also.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...