Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Static route leaking between two vrf's on Nexus 7000 switch

I want to create following setup, wanted to know that how this is achievable.

N7K-VRF-A-----------------------------------------------------N7K-VRF-B

      |                                                                                        |

      |                                                                                        |

Vlan 1                                                                                  Vlan 2

int vlan 1                                                                               int vlan 2

ip add 10.10.10.1                                                                   ip add 20.20.20.1

        |                                                                                               |

        |                                                                                               |

        |                                                                                               |

  SERVER-1                                                                             SERVER-2

(IP-10.10.10.10)                                                                         (IP-20.20.20.20)

Now I want SERVER-1 should speak to SERVER-2 and i want to exchange routes betwene VRFs through Static route leaking.

Thanks

1 REPLY
Cisco Employee

Re: Static route leaking between two vrf's on Nexus 7000 switch

Hi Pravin,

Don't think you can achieve that via static route. If you have spare ports, you can do it via physical loopback cable. Otherwise you just need leak it via BGP.

HTH,
Lei Tian

Sent from Cisco Technical Support iPhone App

278
Views
0
Helpful
1
Replies