Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Static routing on asa 5505

Hi

asa 5505 is on headoffice

is it possible to configure it as a router from headoffice to branches 1,2 and internet

head office is on 192.168.1.0/24

branch #1 is on 172.55.0.0/16 via router 172.55.1.250

branch #2 is on 192.168.10.0/24 via router 192.168.1.250

internet via adsl modem

thanks

  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions

Static routing on asa 5505

Hello,

Yes the ASA can use Dynamic routing protocols and Static routing protocols, now can you provide a diagram of what you are looking for or at least be a little more specific so we can provide you or guide you to the perfect deployment.

Regards,

Julio!!

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
7 REPLIES

Static routing on asa 5505

Are there interfaces on the ASA already cconfigured for Branch #1 and Branch #2?

How do clients from the main office(192.168.1.0/24) get to the two branches currently?

New Member

Static routing on asa 5505

  1. the asa is not configured yet and is not connected. pls see the dig below
  2. by adding static route to their XPs' routing table. (yes, on every machice. tedious work....)

thanks

Static routing on asa 5505

Hello,

Yes the ASA can use Dynamic routing protocols and Static routing protocols, now can you provide a diagram of what you are looking for or at least be a little more specific so we can provide you or guide you to the perfect deployment.

Regards,

Julio!!

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
New Member

Static routing on asa 5505

New Member

Static routing on asa 5505

  1. please don't ask me to configure the isp routers because i cannot. although these routers are in head office but we are not allow to configure them
  2. we are planning to connect the asa 5505 directly to the modem and to remove the internet gatway

thanks

Static routing on asa 5505

Hello pp,rr ,

I think we have answered your question, yes you can configure routing protocols and static routes on an ASA, now what else are you looking for on this particular discussion, we do not see the ASA on the diagram.

Please rate helpful posts.

Julio

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
New Member

Static routing on asa 5505

thanks julio

i will open a new discation on how to configure the asa and will present there a diagram with the asa

sorry for not rating you, didn't know the rules here

368
Views
5
Helpful
7
Replies