Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Stoping DHCP service on switch port

Hi All,

I have 2 4006 switches in my network. I have configured DHCP on that switch. Now my problem is few of the printers which are in this DHCP vlan are getting DHCP address. even if the printer is set in  ip address, it is again getting DHCP address. So please let me know how to stop the DHCP service on that printer connected port. If there is no command to stop, please suggest me any other solution.

Satya.M

Hyundai

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Stoping DHCP service on switch port

The only way I know of to disable DHCP on a specific port would be to use an access list to filter it. Something like the following:

ip access-list extended DHCP_FILTER

10 deny udp any eq bootpc any eq bootps

20 permit ip any any

interface [Printer Interface]

ip access-group DHCP_FILTER in

This will prevent the initial DHCP discover message from the client, but allow all other traffic.

Jason

2 REPLIES
New Member

Re: Stoping DHCP service on switch port

The only way I know of to disable DHCP on a specific port would be to use an access list to filter it. Something like the following:

ip access-list extended DHCP_FILTER

10 deny udp any eq bootpc any eq bootps

20 permit ip any any

interface [Printer Interface]

ip access-group DHCP_FILTER in

This will prevent the initial DHCP discover message from the client, but allow all other traffic.

Jason

New Member

Re: Stoping DHCP service on switch port

Thanks Jason.....it works......

383
Views
5
Helpful
2
Replies