Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

STP for wireless backup

Dears ,

We have two wireless bridges configured between 2 buildings and we are using Cisco 2960 switch in both sides .

Can we use STP to make the one link as failover to other one . We have one primary link which is much capable and we want to make the second link as backup

Regards

Haris

3 REPLIES

Re: STP for wireless backup

Configure a higher STP port cost on the "backup" link - this will make STP use the best = lower ports costs as the primary link.

HTH>

Bronze

Re: STP for wireless backup

Can you provide some sample config ??

Regards

Haris

Re: STP for wireless backup

You can either change a sepcific VLAN cost or the whole port cost:-

Interface x/x

spanning-tree vlan 1 cost 65535 = VLAN cost

or

spanning-tree cost 65535 = port cost

HTH>

147
Views
0
Helpful
3
Replies