10-30-2006 07:16 PM - edited 03-05-2019 12:32 PM
Hi, I am wondering what's wrong:
On my 3550, I created VLAN 10 successfully. However, I attempt to create other vlans and 'show vlan' shows no vlan besides vlan 10 gets created. Please clarify if you have ever seen such a thing and how I can solve this ?
Output is attached.
Solved! Go to Solution.
10-30-2006 07:19 PM
I noticed you are using VLAN Database. Your changes will not get applied if using VLAN Database if you do not type "exit" or "apply". If you Ctrl_Z, etc out of VLAN Database your changes will be null.
Try going into the interface you wish to assign to VLAN 20 and type "switchport access vlan 20". This should create the VLAN for you.
10-30-2006 07:19 PM
I noticed you are using VLAN Database. Your changes will not get applied if using VLAN Database if you do not type "exit" or "apply". If you Ctrl_Z, etc out of VLAN Database your changes will be null.
Try going into the interface you wish to assign to VLAN 20 and type "switchport access vlan 20". This should create the VLAN for you.
10-30-2006 07:23 PM
You are right. That's it. Thanks a lot, Adam.
10-30-2006 07:32 PM
No problem! Glad I could help this time around!
10-30-2006 07:22 PM
Interesting. I restarted the switch and now it works. Very interesting.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide