Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Strange Network Behaviour

Dear Netpro community,

I encountered a situation whereby I am puzzled by the behaviour. I have a HP blade system with HP Virtual Connect.

The profile configured in the VC Connect is as followed:

Web_Profile

Bay 5 Port 4

Bay 6 Port 4

Bay 5 is connected to Bay 6

However, if the etherchannel between C2960G is break or the command switchport mode trunk is not present, I would not be able to ping to the HP Blade Server, which should not be the case.

According to my sysadmin, the server profile is having 1 Logical NIC that binds to 2 different physical ports on the HP Virtual Connect.

Pse advise. Attached is the diagram of the system.

Rgrds,

Ben

120
Views
0
Helpful
0
Replies
CreatePlease login to create content