Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Strange output

Dear Netpro

I Received like this msg while i have enabled ip nat inside on the S1/0

10xs

*Mar 3 20:47:54.530: %SYS-3-CPUHOG: Task is running for (6024)msecs, more than (2000)msecs (1/0),process = Exec.

-Traceback= 0x612EBEEC 0x612EC578 0x612ED034 0x612ED0DC 0x612AFC40 0x612AFDC4 0x612AFECC 0x612AFECC 0x612B0E18 0x612E84B0 0x612F8408 0x612DE280 0x612DED24 0x612DFBB4 0x60F22870 0x60432DB0

*Mar 3 20:47:57.358: %SYS-3-CPUHOG: Task is running for (2028)msecs, more than (2000)msecs (7/7),process = Exec.

-Traceback= 0x612D8048 0x612D8890 0x612D8AD4 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0 0x612D89D0

*Mar 3 20:47:59.366: %SYS-3-CPUHOG: Task is running for (4032)msecs, more than (2000)msecs (8/7),process = Exec.

-Traceback= 0x612D7FD8 0x612D8870 0x612D8AD4 0x612D89D0 0x612D89D0 0x612D9858 0x612E85A0 0x612F8408 0x612DE280 0x612DED24 0x612DFBB4 0x60F22870 0x60432DB0 0x60450578 0x604F164C 0x604F1630

many 10xs

1 REPLY
Silver

Re: Strange output

Hi ,

The output is nothing but traceback which can be converted into messages.(i.e hex values corresponding messges)done by Cisco Tac only.

To know the exact reason better open a TAC with cisco.

They will decode the values and let you know the exact problem or solution.

Thanks,

Satish

147
Views
5
Helpful
1
Replies
CreatePlease to create content