Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Strange: When accessing Client VPN

Hi

we have a SBO (Small branch office) and the staff numbers are allowed to connect to connect to MO(Main Office) Via Client VPN (Sonicwall UTM or Cisco ASA).

so any of the staff members trying to connect the Client-VPN i.e he/she get connects successfully to MO but it kicks all SBO staff  members off the internet.

appreciate your quick response and  inputs here.

Thanks,

srikanth

5 REPLIES
New Member

Strange: When accessing Client VPN

Hi All,

Could any one help me please.

Thanks,

Srikanth

Strange: When accessing Client VPN

Hi Srikanth,

You need to setup split-tunnel on your ASA Firewall, so that only internal traffic will flow into the tunnel but everything else (i.e. internet browsing) traffic go via the local ISP of your remote-vpn users.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

Please follow the link above.

thanks

Rizwan Rafeek

New Member

Strange: When accessing Client VPN

Hi

The prob here is .

THe SBO has one link of ISP , so any one of the user in the office connecting to MO via client VPN.  all the users internet is  is kicking off.

Thanks

Srikanth

Strange: When accessing Client VPN

Post your config.

thanks

New Member

Strange: When accessing Client VPN

hi

sorry to respond you late.

as my previous comments states that :: if any one user among the small branch office gets connect to the Main office via client-vpn, the rest of the employees or users internet is kicking off. so its specific problem at small branch office.

note: it works fine with the other branch office so the configuration is absolutely fine for RA-CLienT VPN.

is that we need to issue a static route command at SBO router as below.

SBO router#

ip route 0.0.0.0 0.0.0.0 

ip route 0.0.0.0 0.0.0.0 

thanks,

srikanth

341
Views
0
Helpful
5
Replies