I have a 3825 router with 6 VIC2-2E/M cards and 2 GB/T1 uplink ports. I need to stream audio through the VIC2-2E/M port into the router and onto the network. I have been advised that I will need a media server (which I do) and a distant end piece of equipment to select different channels of input i.e. Wave 2.0. Can someone advise how I can configure this o work.
The LMR systems connect to the gateways using either analog E&M voice interface cards (VICs) or digital T1 voice or WAN interface cards (WICs). These physical interface cards are inserted into voice network modules (NMs) that contain the digital signal processors (DSPs) necessary to encode and decode the audio stream for transmission over the network.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...