Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ststic nat

Hi - i have problem whith my asa.

Early i have 1 exchange server in our company and i configured asa with next:

static (inside,outside) xxx.xxx.xxx.102 192.168.0.23 netmask 255.255.255.255

access-list outside_in extended permit tcp any host xxx.xxx.xxx.102 eq smtp log

access-list outside_in extended permit tcp any host xxx.xxx.xxx.102 eq https log

But now i have 2 exchange servers and admin ask me make https requests to second server, and smtp to first server:

static (inside,outside) tcp xxx.xxx.xxx.102 smtp 192.168.0.23 smtp netmask 255.255.255.255

static (inside,outside) tcp xxx.xxx.xxx.102 https 192.16.0.14 https netmask 255.255.255.255

But with this configuration mail send from ip on interface outside...

Must I make some other static to other protocol?

  • LAN Switching and Routing
1 REPLY
Hall of Fame Super Blue

Re: Ststic nat

Try adding this to your config

nat (inside) 192.168.0.23

global (outside) xxx.xxx.xxx.102

Jon

104
Views
0
Helpful
1
Replies
This widget could not be displayed.