You could delete some of those phoneloads provided you're not using them. Other than that I don't see anything that you can dump. You have a couple options:
1) Get a bigger flash card. The ISR will take up to a 1 GB CF mod. and technically you can use an off the shelf card from your favorite electronics store. Or you can play it safe and buy Cisco's. Either way it looks like a DOS file system so with a CF reader you easily can copy your files off and back on. Make sure to reformat it FAT (DOS), not FAT32.
2) Buy a USB stick drive to supplement the 64 MB card you have in it. Same stuff about size acquisition methods etc. from #1 apply.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...