Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Sub-interface traffic issue in cisco7609

Hello please support,

I configured sub-interfaces and it is working properly, but some time sub-interface show traffic more then physical interface .

Like 

int gi 3/32              0.13 Mbps  12:00 PM

int gi 3/32.11       855 Mbps   12:00 PM

as per my knowledge physical interface have cumulative traffic of all sub-interfaces. 

interface GigabitEthernet3/32
 no ip address
!
interface GigabitEthernet3/32.10
 encapsulation dot1Q 10
 ip address 111.10.10.1 255.255.255.252
 ip ospf network point-to-point
 ip ospf bfd
 bfd interval 50 min_rx 50 multiplier 5
 no bfd echo
 no cdp enable
!
interface GigabitEthernet3/32.11
 description interlink MPLS
 encapsulation dot1Q 11
 ip address 112.10.10.1 255.255.255.252
 ip ospf network point-to-point
 mpls ip
 mpls label protocol ldp
!

 

Regards,

Damodar Nagar

 

43
Views
0
Helpful
0
Replies
CreatePlease to create content