Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

subnetting

Hi all, if I have subnet say 172.16.4.7/27

what would the first network be ? would it start 172.16.4.0 to 172.16.4.31

or would I start from 172.16.0.0 ?

6 REPLIES
New Member

Re: subnetting

Yes, for 172.16.4.0/27 network host address range would be 172.16.4.1 - 172.16.4.30 , 0 is network address and 31 is broadcast.

For 172.16.0.0/27 network host address range would be 172.16.0.1 - 172.16.0.31 , 0 is network address and 31 is broadcast.

New Member

Re: subnetting

Hi thanks for that, So does that mean for example 172.16.0.0/27 would include all the eay from 172.16.0.0 to 172.16.255.224 ? and if it was 172.16.4.0/27 would this go from 172.16.4.0 to 172.16.255.224 ?

thanks

Re: subnetting

Hi, carl

Subnetting of 172.16.0.0/16 into many equally subnetted /27 blocks would include all the way from 172.16.0.0/27 to 172.16.255.224/27,

and subnetting of 172.16.4.0/24 into many equally subnetted /27 blocks would go from 172.16.4.0/27 to 172.16.4.224/27

HTH

SSLIN

Re: subnetting

Hi, carl

It depends on what the "parent subnet" is.

If you subnet a 172.16.0.0/16 network into many /27 blocks, the first subnet will be 172.16.0.0/27.

If you subnet a 172.16.0.0/23 network into many /27 blocks, the first subnet will be 172.16.3.0/27.

If you subnet a 172.16.4.0/24 subnet into many /27 blocks, the first subnet will be 172.16.4.0/27

If you subnet a 172.16.4.0/26 subnet into two /27 blocks, the first subnet will be 172.16.4.0/27

HTH

SSLIN

New Member

Re: subnetting

can anyone add to this ?

New Member

Re: subnetting

Can anyone give me an example of what subnets we would have with say 10.1.1.5/27, would my first network be 10.0.0.0, second 10.0.0.32 etc ? right the way to 10.255.255.224 ?

424
Views
0
Helpful
6
Replies
CreatePlease login to create content