Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

subnetting

Hi,

Can I use the following IP address between two router for WAN link? I know both are diff. subnet

192.168.1.1/24

192.168.1.24/16

This is interview question.

3 REPLIES

Re: subnetting

Hi

No u cannot use them as point to point connections require the interfaces to be on common subnet.

Thanks

Mahmood

Gold

Re: subnetting

if you use the ip unnumbered feature for your wan interfaces, the IP's don't need to be on the same subnet.

Super Bronze

Re: subnetting

The tricky part, in this instance, is the /24 is a subnet of the /16, also the individual IP addresses are valid host addresses in both address blocks. So, from an IP address perspective, they might be able to communicate from host to host. Whether they could be used on router interfaces for WAN link would further depend the type of WAN link and how you intended to use them. (I've seen something similar, intentionally done, and work, on Ethernet.)

137
Views
0
Helpful
3
Replies
CreatePlease to create content