Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Sup 720 Boot

Hi

Simple question (I hope)

Using 6500 with Sup 720. I have set the boot variable to an image on disk1. Can I have multiple boot variables in the config, if so, in what order are they processed? Can they refer to disk0 and disk1?

Thanks

Ian

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Sup 720 Boot

As Mahmodd said, you can have multiple boot statements and they are executed in sequence starting from 1st to last i.e in the order they were entered.

The router stores and executes the boot system commands in the order in which you enter them in the configuration file. If you enter multiple boot commands of the same type (for example, if you enter two commands that instruct the router to boot from different network servers), the router tries them in the order in which they appear in the configuration file

HTH,Please rate if it does.

-amit singh

2 REPLIES

Re: Sup 720 Boot

Hi

yes u can have multiple boot statements.

Thanks

Mahmood

Cisco Employee

Re: Sup 720 Boot

As Mahmodd said, you can have multiple boot statements and they are executed in sequence starting from 1st to last i.e in the order they were entered.

The router stores and executes the boot system commands in the order in which you enter them in the configuration file. If you enter multiple boot commands of the same type (for example, if you enter two commands that instruct the router to boot from different network servers), the router tries them in the order in which they appear in the configuration file

HTH,Please rate if it does.

-amit singh

124
Views
0
Helpful
2
Replies