Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Sup 720 ROMMON upgrade

Hello, I have to upgrade a 6509 with SUP720. There is a WS-X6724-SFP card on it. I would like to install the 12.2(33) and require a ROMMON upgrade on the 6724 card. Today is installed on SUP720 the 12.2(17d)SXB version. If I upgrade first the IOS will I be able to upgrade the ROMMON of the 6724 later (due to requirements) ? Is better to upgrade the 6724 ROMMON before (can be that new ROMMON is not compatible with old IOS) ?

1 REPLY
Hall of Fame Super Silver

Re: Sup 720 ROMMON upgrade

Hello Helenio,

I may be wrong but I think that all necessary firmware/SW upgrade for linecards is made by supervisor after IOS upgrade.

We moved some mounths ago several C6500 devices in a campus from 12.2.(18)SXF to 12.2(33)SXH2 but we didn't upgrade any rommon in linecards before the IOS upgrade.

The IOS upgrade was needed to manage correctly the 8 10GE linecard

dir /all

Directory of disk0:/

1 -rw- 82524740 Jan 8 2007 17:04:12 +01:00 s72033-adventerprisek9_wan-mz.122-18.SXF7.bin

2 -rw- 28896 Jan 30 2008 06:05:20 +01:00 RT-RM-SXR000-B-E-2

3 -rw- 78212100 May 8 2008 19:40:36 +02:00 s72033-advipservicesk9_wan-mz.122-33.SXH2.bin

an we have the WS-6724-SFP linecard also:

sh module

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

>> 1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL10414U5N

2 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-45AF SAL10425GAX

3 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL11413LUW

5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL10403LHL

I think you can go straight to IOS upgrade

Hope to help

Giuseppe

628
Views
0
Helpful
1
Replies