Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

sup engine compatibility

Hi,

I have a 6506-E switch and trying to insert ws-x6k-sup2-2ge in slot. Tried in first slot and 5th and 6th slot. In all the slots the sup engine comes up. Need to know which is the recommented slot in 6506-E switch to insert the above sup engine.

Also if i am inserting sup 32 in the same switch, which is the recommented slot...

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: sup engine compatibility

Richard.Jeff wrote:

Hi,

I have a 6506-E switch and trying to insert ws-x6k-sup2-2ge in slot. Tried in first slot and 5th and 6th slot. In all the slots the sup engine comes up. Need to know which is the recommented slot in 6506-E switch to insert the above sup engine.

Also if i am inserting sup 32 in the same switch, which is the recommented slot...

Thanks

Richard

sup2 goes into slots 1 & 2 (2 is used for standby sup)

sup32 goes into slots 5 & 6 (6 is used for standby)

Jon

3 REPLIES

Re: sup engine compatibility

Hi,

I have a 6506-E switch and trying to insert ws-x6k-sup2-2ge in slot. Tried in first slot and 5th and 6th slot. In all the slots the sup engine comes up. Need to know which is the recommented slot in 6506-E switch to insert the above sup engine.

Also if i am inserting sup 32 in the same switch, which is the recommented slot...

Thanks

As per the link Sup engine slot for 6506E switches is slot number 1,just check out the below link for more information

http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140sp/140sp1155.pdf

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

Hall of Fame Super Blue

Re: sup engine compatibility

Richard.Jeff wrote:

Hi,

I have a 6506-E switch and trying to insert ws-x6k-sup2-2ge in slot. Tried in first slot and 5th and 6th slot. In all the slots the sup engine comes up. Need to know which is the recommented slot in 6506-E switch to insert the above sup engine.

Also if i am inserting sup 32 in the same switch, which is the recommented slot...

Thanks

Richard

sup2 goes into slots 1 & 2 (2 is used for standby sup)

sup32 goes into slots 5 & 6 (6 is used for standby)

Jon

New Member

Re: sup engine compatibility

Thanks a lot for the inputs....

231
Views
0
Helpful
3
Replies
CreatePlease to create content