Sup IV Failover....both sups have CPU pegged at 100%
We have issues with a 4507-R. We had sh proc cpu history at 100%. Did a failover...performance increased but counters still showed util at 100%. Two sups with CPU at 100%. This all stemmed from the error.%C4K_HWPORTMAN-4-BlOCKEDTX QUEUE: blockedtransmitquue HwTxQId0 can switch p hyport Gig4/47 count-126607. What is the command to see if there is some other hardware issue...
Re: Sup IV Failover....both sups have CPU pegged at 100%
A Dell Optiplex PC running Windows AMD emulation dirver for a Broadcom 5700 NIC supports 10/100. We move this PC around and the problem follows that port. We turn the port on and CPU utilization goes to 100%. We shut it down and the CPU levels off to 20%. The PC is off but the NIC has wake on LAN. We turned off the port and will have the server/pc owner back out of the driver.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.