Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

sup status led orange. Why?

Hi to all.

I have a 4006 with:

Supervisor III 1000BaseX (GBIC)

48 10/100BaseTX (RJ45)V

status led is orange but in the log there is nothing.

attached th sh env that looks to be ok!

any idea about this problem

6 REPLIES
Hall of Fame Super Bronze

Re: sup status led orange. Why?

From the file you posted:

Chassis Temperature = 36 degrees Celsius

Chassis Over Temperature Threshold = 75 degrees Celsius

Chassis Critical Temperature Threshold = 95 degrees Celsius

_____________________________________________

36 Celsius seems a bit high operating environment and I believe that's the reason for the warning light being on.

New Member

Re: sup status led orange. Why?

Cisco says the led should go orange when Supervisor engine temperature sensor exceeds minor threshold (that is 75 Celsius)

Hall of Fame Super Bronze

Re: sup status led orange. Why?

Please post the output from typing

show test

and

show module

Hall of Fame Super Bronze

Re: sup status led orange. Why?

I checked your file again and :

PEM WS-X4095-PEM -- bad/off

This can also be causing the orange led.

Re: sup status led orange. Why?

hi, it could be your FAN, please so

" show sys " and look at FAN status.

HTH

Jorge

Re: sup status led orange. Why?

Friend,

The SuP shows orange if either one of the power supply or the Fan is switched off.

as per the logs, it seems either the fan or power supply is not working and hence you are seeing the orange light

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/05trblsh.html

HTH, rate if it does

Narayan

367
Views
3
Helpful
6
Replies
CreatePlease to create content