Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

VIP Purple

Sup2T IOS Upgrade to Support WS-X6904-40G

Hi All,

We are currently running "s2t54-adventerprisek9_npe-mz.SPA.150-1.SY.bin" image on our Sup2T (single Supervisor in each chassis). We want to upgrade two of our core 6K to support WS-X6904-40G line card.

I am going through below release note thinking about upgrading it  to "s2t54-adventerprisek9-mz.SPA.151-2.SY.bin"

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/release_notes.html#wp4833604         

There are few code options available to me (see below), What version do you guys suggest me based on your experience with this line card.

Sup2T-15.x.PNG

In that I found this EFSU compatibility matrix which I could not understand properly. Should I go by this compatibility matrix  & make a decision?

Upgrade to Release15.0(1)SY1 or later before installing WS-X6904-40G (see the "EFSU Compatibility" section).

TIA

Rasika

  • LAN Switching and Routing
Everyone's tags (3)
239
Views
0
Helpful
0
Replies