Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SUP2T VSS- Mixing number of Supervisors

Can you have 2 Sup2Ts in one chassis and one Sup2T in another in VSS?

  • LAN Switching and Routing
VIP Super Bronze

Re: SUP2T VSS- Mixing number of Supervisors

No it should be one and one or 2 and 2


Sent from Cisco Technical Support iPhone App

Super Bronze

Re: SUP2T VSS- Mixing number of Supervisors


The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.


Perhaps not good practice (to do that intentionally), but if you have a IOS that supports quad VSS, it should function with one of the four sups down, so I would expect it to work with only three installed.

This widget could not be displayed.