Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Sup2T What is the function NVRAM Battery ??

Hi. all

C6509E Sup2T. Major error.

The reason TestNVRAMBatteryMonitor ---------> F

Battery Fail.

What is the function NVRAM Battery ??

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Sup2T What is the function NVRAM Battery ??

         CSCub30570            Bug Details

6k: Sup2T TestNVRAMBatteryMonitor Failure

Symptom:
- Minor or Major failure in "show mod" under SUP2.

- TestNVRAMBatteryMonitor failure count increment via "show diagnostic result mod < x> test < x> detail

- OBFL logg message from "show logging onboard"
GOLD_OBFL-3-GOLD : Diagnostic OBFL: Low NVRAM battery power is detected on module < x>

- Syslog message from "show logging"
CONST_DIAG-2-LOW_NVRAM_BATTERY_FOR_THREE_DAYS: Low NVRAM battery power detected for 3 consecutive days on module < x>

Majority  reported problem have been corrected by removing the SUP, pressing the  battery, and insert the SUP again. If this procedure does not resolve  the issue, please open TAC case.

Conditions:
This bug only applies to SUP2T only.

HTH

Regards

Inayath

*Plz rate all usefull posts.

1 REPLY
Cisco Employee

Sup2T What is the function NVRAM Battery ??

         CSCub30570            Bug Details

6k: Sup2T TestNVRAMBatteryMonitor Failure

Symptom:
- Minor or Major failure in "show mod" under SUP2.

- TestNVRAMBatteryMonitor failure count increment via "show diagnostic result mod < x> test < x> detail

- OBFL logg message from "show logging onboard"
GOLD_OBFL-3-GOLD : Diagnostic OBFL: Low NVRAM battery power is detected on module < x>

- Syslog message from "show logging"
CONST_DIAG-2-LOW_NVRAM_BATTERY_FOR_THREE_DAYS: Low NVRAM battery power detected for 3 consecutive days on module < x>

Majority  reported problem have been corrected by removing the SUP, pressing the  battery, and insert the SUP again. If this procedure does not resolve  the issue, please open TAC case.

Conditions:
This bug only applies to SUP2T only.

HTH

Regards

Inayath

*Plz rate all usefull posts.

1640
Views
0
Helpful
1
Replies
CreatePlease login to create content