Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SUP6 HSRP Limit

Hello All -

    We ran into the HSRP limit on our 3750s.  Luckilly we just finished a data center with dual 4506s in them.  We intend to start moving all the VLAN routing from the 3750s to the 4506s.  I have searched but cannot find any reference to a HSRP limit on the WS-X45-SUP6-E Supervisor Engine.  Is anyone aware of what if any is the HSRP limit on these sup engines?

Thanks

Mike.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SUP6 HSRP Limit

Hi Mike,

The limitation is on software. With HSRP v1, the max number of group is 256. With HSRP v2, you don't have that limitation. HSRP V2 is supported on 12.2(52)SG.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_5184.html

Hope that helps.

Regards,

Lei Tian

2 REPLIES
Cisco Employee

Re: SUP6 HSRP Limit

Hi Mike,

The limitation is on software. With HSRP v1, the max number of group is 256. With HSRP v2, you don't have that limitation. HSRP V2 is supported on 12.2(52)SG.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_5184.html

Hope that helps.

Regards,

Lei Tian

New Member

Re: SUP6 HSRP Limit

Thank you!!!

354
Views
0
Helpful
2
Replies
CreatePlease to create content