06-30-2009 02:39 AM - edited 03-06-2019 06:31 AM
Hi,
I'm receiving a new supervisor, and was told that it won't come with a version on it. How do I install an image on it ( Catos )? without affecting the system stability . there's another redundant supervisor on the switch ( also Catos )
Thank you for your help.
Solved! Go to Solution.
06-30-2009 02:32 PM
System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml
Hope this helps.
Please rate when applicable and/or helpful.
06-30-2009 02:32 PM
System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml
Hope this helps.
Please rate when applicable and/or helpful.
07-06-2009 11:41 PM
Thank you, it helped!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: