Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
Bronze

sup720 3bxl cannot boot with SXJ1 image

I have a SUP720 3BXL module. It can boot with the s72033-ipservicesk9_wan-mz.122-33.SXI4a.bin image but cannot boot with the s72033-adventerprisek9_wan-mz.122-33.SXJ1.bin image.

It just stuck at:

Self decompressing the image : ################################################################################################################################################################################################################################ [OK]

 

Any ideas?

Thanks.

 

4 REPLIES
Hall of Fame Super Gold

Did you try and compare the

Did you try and compare the MD5 hash value of the file you've downloaded against the MD5 hash value found in the Cisco website?

 

If I remembered correctly, SXJ requires a DRAM and flash/bootflash of 512.  It doesn't discriminate whether or not you've got "XL".  

Bronze

Yes the MD5 value matches and

Yes the MD5 value matches and I am trying to boot from disk1.

Thanks.

Hall of Fame Super Gold

Can you boot the IOS from sup

Can you boot the IOS from sup-bootflash: or disk0:?

Bronze

No, cannot boot from neither

No, cannot boot from neither sup-bootflash: nor disk0:.

Previously I said I can boot SXI4a, but now I cannot boot SXI4a either. The same symptom, stopped after "Self decompressing the image : OK". The register is set to 0x2102.

60
Views
0
Helpful
4
Replies
CreatePlease to create content