Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SUP720-3BXL - Uplink ports

hi,

I would like to know whether the Gigabit ports on the SUP720 provide only 1Gbps or more than that (2/3Gbps) but below 10Gbps.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: SUP720-3BXL - Uplink ports

Hello New,

to go above 1Gbps you need to use a bundle an etherchannel:

2 Po2(SU) - Gi6/1(P) Gi6/2(P)

sh module 6

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

6 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAL10456Z23

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

6 0016.c847.c874 to 0016.c847.c877 5.2 8.4(2) 12.2(33)SRC Ok

Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------

6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL10456WAT 1.8 Ok

6 MSFC3 Daughterboard WS-SUP720 SAL10446KK7 2.5 Ok

Mod Online Diag Status

---- -------------------

6 Pass

the single GE cannot go above 1Gbps because it has to be compliant to IEEE 802.1z standard

Hope to help

Giuseppe

1 REPLY
Hall of Fame Super Silver

Re: SUP720-3BXL - Uplink ports

Hello New,

to go above 1Gbps you need to use a bundle an etherchannel:

2 Po2(SU) - Gi6/1(P) Gi6/2(P)

sh module 6

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

6 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAL10456Z23

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

6 0016.c847.c874 to 0016.c847.c877 5.2 8.4(2) 12.2(33)SRC Ok

Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------

6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL10456WAT 1.8 Ok

6 MSFC3 Daughterboard WS-SUP720 SAL10446KK7 2.5 Ok

Mod Online Diag Status

---- -------------------

6 Pass

the single GE cannot go above 1Gbps because it has to be compliant to IEEE 802.1z standard

Hope to help

Giuseppe

148
Views
0
Helpful
1
Replies
CreatePlease to create content