Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SUP720-3BXL

gius i have this SUb for my 6506.....now its has catos and i want to change it to IOS now first question how i am going to do that ....second question is do i have to put MSFC3 daughter card for that as well.....please urgent help me is needed.....now why would i use MSFC3 card on this sub......thanks in advance

1 REPLY
Community Member

Re: SUP720-3BXL

Hi,

What you have is sup720.It should already have MSFC3 on board.All you need to do is to get an IOS image and boot the box and configure the features.Remember that you need to identify the equalent IOS command for all the features you have currently configured.I am not sure if there is any other easy method for this configuration.

Please also check other details of this sup at

http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet09186a0080159856.html

Hope this helps.

Thanks

Nambi

134
Views
0
Helpful
1
Replies
CreatePlease to create content