Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Supervisor card status light - urgent

t

i have just reinserted a standby supervisor card into a cat 6509 after upgrading the RAMfromn 128 to 51M2 and the status light keeps going from green to red. help. Its not being recognised under show module

What do i do?

8 REPLIES
Hall of Fame Super Bronze

Re: Supervisor card status light - urgent

It seems you've missed a step or you have wrong/faulty memory. It's hard to troubleshoot this urgent matters online, why not calling Cisco TAC?

__

Edison.

New Member

Re: Supervisor card status light - urgent

Thaanks Edison

They are new ones. I put them in at first and they were still reading 128M but it came back up alright which is strange as they are 512M RAM. So i removed it and reinserted it properly and now I have the status and power mgmt light going from green to red and then to green continuosly, do u think the RAM has been damaged? Can the sup card be damaged already as I have to remove it twice?

Its been doig this now for 30mins

Pls help.

New Member

Re: Supervisor card status light - urgent

Can you remove the RAM and make sure it still functions normally in it's original condition?

New Member

Re: Supervisor card status light - urgent

i will try thayt now

New Member

Re: Supervisor card status light - urgent

Its doing the same thing.

New Member

Re: Supervisor card status light - urgent

If it's doing the same thing when you put everything back in it's original state, it could me a couple of things. First are you absolutely sure that everything is seated properly, fully inserted, etc? Assuming it is, something may have happened to the board which is causing it to malfunction. I would really suggest opening a TAC case.

New Member

Re: Supervisor card status light - urgent

Thanks. I have. I have a spare sup card. Do i just place it in and it will download d config from the active?

New Member

Re: Supervisor card status light - urgent

Yes I believe it will. Make sure you have your active runnning configuration saved however, just in case.

315
Views
0
Helpful
8
Replies