We are in a buying process of catalyst 4500 to replace the 6006 (endofsupport). We are a broadcast tv station with 400 users unified in the same building accross 4 flors with 35xx switchs linked with fiber (GBIC), step by step we are introducing video in desktops(production users) although there are another networks for video broadcast not merged, so we want to chose best option (tailored to our size and future convergence) of supervisor card: II Plus or IV?
Thanks Edison, cause I'm not a network specialist let me explain our context, we dont have external branches, we are concentrate in one building (lan) with a 2mpbs ISP connection to Internet (to increment in the future), we'll use QOS because to implement video on desktop (production users) so I would like to chose the best cost/effective supervisor according our size.
What would happen if within 2 years thing change and you need full Layer3 routing protocols. You will spend more in the long run. Again, if money is a factor and SupII Plus meets your needs, then I guess you are looking for a validation to go with Sup II Plus...
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...