Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Supported RFCs and published MIBs for monitoring Cisco 881

Supported RFCs and published MIBs for monitoring Cisco 881

Can somebody help me know the supported RFCs and published MIBs for monitoring a Cisco 881 3G (WWAN) Router? Kind of knowing in this format;

RFC 1213, CISCO-SMI, CISCO-CCME-MIB, CISCO-CLASS-BASED-QOS-MIB, CISCO-MEMORY-POOL-MIB, CISCO-PROCESS-MIB, CISCO-UNIFIED-FIREWALL-MIB

2 REPLIES

Re: Supported RFCs and published MIBs for monitoring Cisco 881

On the 881, issue the command:

router#show snmp mib

Then use the snmp object navigator:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput

New Member

Re: Supported RFCs and published MIBs for monitoring Cisco 881

On a 881G running 12.4(24)T2 with a 3G-GSM card, can the RSSI value as shown in the "show cellular 0 radio history" get polled by SNMP?

Which OID? I would like to use MRTG for monitoring radio signal strength.

1021
Views
0
Helpful
2
Replies