Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

switch 1 provision ws-c3750-24ts - what is?

I just did a search through the 3750 configuration guide for "switch 1 provision". But I don't find this line. Can someone please explain or point me to a reference? Thanks.

(http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_se/configuration/guide/3750SCG.pdf)

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: switch 1 provision ws-c3750-24ts - what is?

Its the numbering of the switches in the stack.

The 3750 switches are Stackable.

So if you add another switch to the stack using the Stackwise Cable, you will see something like this.

switch 1 provision ws-c3750-24ts

switch 2 provision ws-c3750g-24t

Now if you want to remove the switch from the stack, you disconnect it and do a

"no switch 2 provision ws-c3750-24ts"

This will remove the port configurations for the second switch.

If you only have 1 switch, its normal to see this displayed.

1 REPLY
New Member

Re: switch 1 provision ws-c3750-24ts - what is?

Its the numbering of the switches in the stack.

The 3750 switches are Stackable.

So if you add another switch to the stack using the Stackwise Cable, you will see something like this.

switch 1 provision ws-c3750-24ts

switch 2 provision ws-c3750g-24t

Now if you want to remove the switch from the stack, you disconnect it and do a

"no switch 2 provision ws-c3750-24ts"

This will remove the port configurations for the second switch.

If you only have 1 switch, its normal to see this displayed.

16013
Views
10
Helpful
1
Replies