Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Switch 2950 boot problem

Hi

The switch boots up immediately into Rommon mode. The flash system is empty. Is there a way to copy a new ios into the flash file system?

Thanks for any pointer

Regards

1 REPLY
Hall of Fame Super Blue

Re: Switch 2950 boot problem

You will need to use xmodem to transfer a new IOS onto the 2950. Attached is a link to recovering software on 2950 switches -

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_20_ea2/configuration/guide/swtrbl.html#wp1021167

Make sure you set BAUD rate to 115200 as that will speed things up a bit :-)

Jon

102
Views
0
Helpful
1
Replies