Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

switch 2960xs system messages 2-critical Description: TCAM region 24 errormove failed, source index 4941 target index 4940.

Dear sir

My cisco switch 2960xs run layer 3 warning error

 system messages 2-critical Description: TCAM region 24 errormove failed, source index 4941 target index 4940.

How can fix this error ? I send for u file running-config on switch 2960xs 48POrt

Thanks 

1 ACCEPTED SOLUTION

Accepted Solutions

Hello,

Hello,

Cisco suggests rebooting the switch. Have you rebooted it ?

TCAM region %d error: %s %d %s %d.

Explanation    TCAM manager region error.

Recommended Action    Reboot the switch.

http://www.cisco.com/c/en/us/td/docs/ios/system/messages/guide/sm_cn10.html

Masoud

3 REPLIES

Hello,

Hello,

Cisco suggests rebooting the switch. Have you rebooted it ?

TCAM region %d error: %s %d %s %d.

Explanation    TCAM manager region error.

Recommended Action    Reboot the switch.

http://www.cisco.com/c/en/us/td/docs/ios/system/messages/guide/sm_cn10.html

Masoud

Community Member

Hello

Hello

Thanks. I was reboot my switch and correct fix error tcam

Hello,

Hello,

Glad your problem was solved.

Masoud

208
Views
0
Helpful
3
Replies
CreatePlease to create content